Our Liquid Leak Detection Alarm Units

Intended for all types of building, and in particular for office buildings, data centers, banks, museums, airport, stadiums, high-rise buildings, or department stores, our detection units allow automatic and instantaneous detection of water, acid or hydrocarbon liquid leaks.
Why install a leak detection unit?
To avoid recurring leaks and reduce the amount of network repair costs.
To minimize damage to your equipment, your data or your floor covering (parquet, tiles, etc.).
Designed in France by our team, our liquid leak detection units are made to measure after taking into account your specific needs.
We have put forward two technical solutions at your disposal:
  • Digital Addressable Alarm Unit with localization, which allows you to locate the leak within a radius of one meter. Pin point location of leak in floor map graphics. Redundancy loop back.
  • Analog Leak Detection Alarm Unit with localization and without localization, with audible and visual alarm.
Description
OL-CLS is a high-performance sensor cable used to detect leaks of conductive liquids. The detected liquids are primarily water, glycol/water, weak and strong acids, bases, inorganic solutions, etc. The OL-CLS sensor cable is offered as modular sensor section with factory-assembled IP68-rated industrial connectors. Sensing cable construction is of low smoke zero halogen material (LSZH). Our OL-CLS water detection cable detects and locates, when in contact with any conductive liquid leak. By design, the OL-CLS cable is “Dustproof” so it resists dust and is insensitive to ground braid touches. There are no exposed metal parts on the sensing cable.

Features and Benefits

  • Detects immediately all conductive liquids
  • Corrosion-resistant, can be used with strong acids and bases
  • Fully passive construction, expected service life of 30+ years
  • Insensitive to pressure, vibrations, methane
  • Very wide operating temperatures range
  • Cable breaks are reliably detected and the broken sensor cable string clearly identified
  • Leak location accuracy +/- 1m
  • Made of LSZH Material

Typical Applications

  • Leak detection in data centers and mission critical infrastructure.
  • Banking and commercial Buildings
  • Pump Rooms
  • HVAC Plant rooms
  • Remote chemical facilities
  • Monitoring of Military and Scientific depots
  • Chilled water piping applications
  • Telecom and High-Rise Buildings
  • Stadiums and Museums
Description

OL-ALS is a high-performance sensor cable used to detect wide range of highly corrosive conductive liquids / acids. The OL-ALS can pin-point the location of corrosive conductive liquids throughout its entire length and can be re-used after correct cleaning using recommended solvents. The detected liquids are primarily glycol, weak and strong acids, bases, inorganic solutions, etc. The OL-ALS sensor cable is offered as modular sensor section with factory-assembled IP68-rated industrial connectors. Sensing cable construction is of low smoke zero halogen material (LSZH).

Our OL-ALS water detection cable detects and locates, when in contact with any conductive liquid leak. By design, the OL-ALS cable is “Dustproof” so it resists dust and is insensitive to ground braid touches. There are no exposed metal parts on the sensing cable.

Features and Benefits

  • Detects immediately leaks of corrosive conductive liquids
  • Corrosion-resistant & fully reusable after contamination
  • Fully passive construction, expected service life of 30+ years
  • Very wide operating temperatures range
  • Reduced maintenance and easy troubleshooting
  • Leak detection accuracy +/- 1m

Typical Applications

  • Leak detection in battery rooms, acid storage tanks, etc.
  • Leak detection in Laboratories
  • Leak detection in Commercial buildings, hospitals, data centers, etc.
  • FAB plants, semi-conductor plants etc.

Need a Liquid Leak Detection For Your Project?