Our Liquid Leak Detection Alarm Units
Why install a leak detection unit?
Designed in France by our team, our liquid leak detection units are made to measure after taking into account your specific needs.
- Digital Addressable Alarm Unit with localization, which allows you to locate the leak within a radius of one meter. Pin point location of leak in floor map graphics. Redundancy loop back.
- Analog Leak Detection Alarm Unit with localization and without localization, with audible and visual alarm.
The OL-HCM module is a heavy-duty connector, able to withstand exposure to hydrocarbons. It is made with durable material so that it can remain reliable and responsive throughout its service life. The connectors are IP68 and suitable for outdoor application.
The OL-LEADER is a 5m neutral cable with a female connector which allows the circuit to be started from the detection unit. The leader cable will be connected between the control panel and the starting of the first sensing cable.
The OL-END is the Digital End Termination End of circuit socket with Male connectors for sensing cables. Each sensing cable zone must be terminated with an OL-END termination plug.
The OL-JUMPER is a 5m neutral cable with a male connector and a female connector which allows you to connect two liquid leak detection cables. The OL-JUMBER is also used to connect sensing cable between two zones via a neutral communication cable.
OL-CLIPS are used to hold and position the cables in the exact location where user requires. The clips will enable the sensing cable fixes firmly on the floor without lifting. It is recommended the clips to be installed at intervals of 1m and/or every change of direction if less than 1m.
OL-TAGS is recommended to be attached on each sensing cable at intervals of no greater than 3m. Each tag will have zone location, sensor cable number and the meter location of that particular sensing cable or zone.
OL-BUS is a communication cable which allows connection between alarm terminal and sensing cables and also provides connection between two sensing cables. The neutral cable can also be used to create an extension between two zones.